HeadroomComponentsNotesDownload
Notes

Free FPS: the memory setting most PCs leave off

2026-10-02

Here's a test PC we measure on: a Ryzen 7 7800X3D with a 32 GB kit of DDR5 rated 6400. Headroom read the kit's rated speed from its model number, then checked what it was actually running at:

speed
What the box says 6400 MT/s
What it was actually running at 4800 MT/s

A quarter of the speed that was paid for, unused. And this is the normal case, not a fault.

Why your RAM runs slower than its box says

Every memory stick carries two speeds:

A new PC boots at the safe default, and stays there until someone switches the profile on in the BIOS. Plenty of PCs, including prebuilt ones, never get switched on.

What it costs you

Memory speed is how fast the CPU can get data to work on. Our score test copies a fixed amount of data through RAM, and at 4800 this machine took 21.7 seconds for a job that its rated 6400 should finish in about 16.3: roughly a third slower, on paper.

In games, the gain from turning it on depends on the game: the ones held back by the CPU feel it most, because the CPU's half of every frame is waiting on memory. It won't turn a slow graphics card into a fast one, but it's the one speed-up that costs nothing.

Then we turned it on and measured, same PC, same test, nothing else changed:

at 4800 EXPO on, 6400
Copying data through memory 20.8 s 18.1 s 13% faster
One core 16.1 s 14.8 s 8% faster
All cores 14.3 s 13.3 s 7% faster
Graphics card 10.6 s 10.6 s no change, as expected

Free, and measured.

One thing we learned on the way: this PC's EXPO failed when it was built, on its original BIOS. After a BIOS update, the same kit ran at its full 6400 first try. If EXPO or XMP won't work on yours, update the BIOS before giving up. If it still won't, keep the profile on but set the memory speed one step lower than the kit's rating (a 6400 kit at 6000, a 3600 kit at 3200): most of the gain, without asking the CPU for more than it can comfortably do.

How to check yours

  1. Open Task Manager, go to Performance → Memory, and read Speed.
  2. Look up your kit's rated speed: it's on the box, the label on the stick, or in the model number (a G.Skill F5-6400… kit is a 6400 kit).
  3. If Task Manager shows less than the rating, the profile is off.

Or let Headroom do both: it reads the rated speed from the kit's model number and tells you on its home screen, free.

How to turn it on

  1. Restart and enter the BIOS (usually Delete or F2 while it boots).
  2. Find the memory settings (often under Tweaker, AI Tweaker or OC) and set the profile to EXPO (AMD) or XMP (Intel), usually Profile 1.
  3. Save and restart. On newer AMD boards the first boot can sit on a black screen for a minute or two while the board trains the memory. Leave it alone; that's normal.
  4. Check Task Manager again: Speed should now read the rated number.

When not to

Turning the profile on asks the memory, and the CPU's memory controller, to run faster than the safe default. On a healthy PC that's fine; that's what the kit was sold for. But:

Headroom checks for both before it suggests the switch: if Windows has logged unexpected restarts or hardware errors, it puts those first, and tells you to turn EXPO on only once they're fixed.

Headroom measures this on your own PC, free, and nothing leaves your computer.

Get Headroom